SimScale simulation projects by sjjaber77 | Page 1

sjjaber77's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The air flow around a horizontal axis wind turbine HAWT and the resulting forces on the rotor are simulated.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

CFD compressible-flow model of a transsonic air intake

Public Profile

sjjaber77's profile