SimScale simulation projects by simianrainbow | Page 1

simianrainbow's profile

Initial Model of 2017 F1 Car (Surfaces do not conform to FIA rules - CAD picked up from GrabCAD and heavily simplified + modified to include internals etc)
Suspect CAD needs further simplifying. 
Future updates to include: -
 Porous radiator 
- Simple Brake duct geometry 
- Rotating MRF zone for rim 
- Add driver

Modified 'Aerodynamic analysis of a formula one F1 race car'

Add Diffuser, Radiators
Update FWing, RWing

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

This is a modified version of the FWing CAD so there are no  sharp surfaces around the Front Wing Pillars. It should improve the mesh.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

simianrainbow's profile