SimScale simulation projects by samarth_2412 | Page 1

samarth_2412's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This is a project for a student project, where a formula 1 fron wing was tested

study of temperature of CVT under steady operating conditions to facilitate the design of CVT cover

to check the increment in the temperature of the primary and secondary pulley under steady operating conditions.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

samarth_2412's profile