SimScale simulation projects by rsaint_leger | Page 1

rsaint_leger's profile

This project serves as a template for calculating the age of the fluid in CFD Simulation in SimScale platform. Also it is a validation project for the calculation of Age of fluid (Refer to the Tutorial/Validation doc).

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Tutorial project with the goal of simulating the wave effects on a boat.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This  project analyzes the aerodynamics of a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

rsaint_leger's profile