SimScale simulation projects by rohitpathepuram | Page 1

rohitpathepuram's profile

In this tutorial, a fluid flow simulation of water flow through a pipe junction is carried out. The objective is to get insights of the flow field at the junction of the pipe. There are two inlets and one outlet for this configuration. The simulation will show if there is a recirculation area near the junction and if the design needs to be optimized accordingly.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Public Profile

rohitpathepuram's profile