SimScale simulation projects by qzang | Page 1

qzang's profile

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates a Centrifugal water pump.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for setting up a Multi-phase flow simulation

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

This project shows how to simulate the airflow around a motorbike.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial for meshing of valve geometry with Snappy Hex Mesh

umbrella drag resistance sadhakjsdkasdkla

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

Public Profile

qzang's profile