SimScale simulation projects by pnono | Page 1

pnono's profile

In this project a static analysis of a beam und a gravitational load is demonstrated.

In this project a static analysis of a shaft under a torque load is demonstrated.

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

This tutorial shows how to analyze the Heat transfer in a heat sink.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

pnono's profile