SimScale simulation projects by pghumare | Page 1

pghumare's profile

This tutorial teaches how to run a transient incompressible flow simulation using the Subsonic analysis type in SimScale using the AMI rotating zone on a Francis turbine.

wind comfort study for London area of walkie talkie building

Pedestrian Wind Comfort Analysis for assessing wind speed through the city of Rotterdam

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

To solve the issue that nodal load bc allows the assignment of faces

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

This project simulates laminar flow through a straight circular pipe.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

SimScale LBM results were compared and validated against measured data, wind tunnel data and past CFD results presented in AIJ Case F

This project simulates turbulent flow through a straight circular pipe.  Two turbulence models were used: kEpsilon and kOmegaSST. Simulation results from  were validated using corresponding analytical expressions.

The goal is to validate the Conjugate Heat Transfer v2.0 analysis type on the SimScale platform, particularly focusing on volumetric heat generation in rectangular fins.

The project illustrates how to simulate airflow around a complex F1 vehicle.

Public Profile

pghumare's profile