SimScale simulation projects by pfernandez | Page 1

pfernandez's profile

Evaluate simple shapes for radiator ducts.

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

NASA's Turbulence Modelling Resource was created with the purpose of offering documentation on the various RANS turbulence models available and some reference cases to verify the implementation of such models.

Albeit the differences in  the implementation of the models in OpenFOAM and NASA documentation, with this project we will see if we can get comparable results.

This project contains resources for Session 1 of the F1 Workshop

CFD-Simulation of 2015s Formula Student Car of Team Starcraft e.V.

Aerodynamic simulation of LEGO Technic's 24 Hours Race Car. CAD geometry by dk, available in GrabCAD.

Aerodynamics of the front-engined Porsche 944.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

The air flow around a football is simulated with focus on the effects of the pattern on the football surface and spinning of the ball.

Not as famous as the 1964 DB5, but certainly the most impressive transformer car in the series. In this project we have a look at how the Lotus Esprit performs under water.

External aerodynamics on the geometry of the 2016 Ford Shelby GT350R Mustang.

NACA 0012 airfoil from NASA's TMR website.

Simple geometry meshed in a third party software to test the Upload Mesh functionality of SimScale.

The 1930's P2 is a modified version of the car that won the first Automobile World Championship in 1925.  Both car (by Carco) and mannequin (by Emmanuel Mahay) can be found at GrabCAD.

Simulation of the river flowing at the Fallingwater house by Frank Lloyd Wright.

In this simulation I am going to focus on the radiator. Thus, for the sake of simplicity, I will ignore certain elements of the vehicle.

Copy of @Kai_himself's project to test structured meshes.

Water pipe simulations with structured mesh.

With a 1000 Pa pressure on small inlet face with air coming from atmosphere and an open to atmosphere outlet face: 1) What is the inlet air speed. 2) What is the average pressure inside the large chamber.

The geometry replicates the Ames wind tunnel section used, back in the 1940's, to experimentally investigate NACA submerged duct entrances.

The intention is to compare the simulation results against declassified experiments carried out at the time.

Perrinn F1 2017 with some 2019 aero rule implementations.

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

Wooden toy based on the Ford Model T by Altug Tuncel. Geometry available at GrabCAD: https://grabcad.com/library/wooden-toys-12-1

External aerodynamics of the DrivAer model.

This project simulates the air flow around the Ahmed body for validation purposes.

Public Profile

pfernandez's profile