SimScale simulation projects by ostapkryvytskyy | Page 1

ostapkryvytskyy's profile

The purpose of this project is to setup the wind tunnel conditions for external flows around objects at varying boundary conditions. Although X 43 is a hypersonic aircraft but for this project subsonic conditions are applied.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project demonstrates the usage of rotating zones within transient flow simulations.

Public Profile

ostapkryvytskyy's profile