SimScale simulation projects by oliver47 | Page 1

oliver47's profile

The aim of this test case is to validate the temperature profile  for a buoyant flow simulation between a hot and cold cylinder. - Copy MORE https://www.simscale.com/docs/validation-cases/convection-concentric-cylinders/

This project simulates Couette flow - flow in annulus fixed-rotating cylinder pair. - Copy MORE https://www.simscale.com/docs/validation-cases/rotating-zones-taylor-couette-flow/

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used. - Copy MORE https://www.simscale.com/docs/tutorials/natural-convection-led-spotlight/

In this project a steady-state thermal analysis of a hollow sphere with internal radiating surface is demonstrated. - Copy MORE https://www.simscale.com/docs/validation-cases/hollow-sphere-convection-radiation/ AND https://www.code-aster.org/doc/default/fr/man_v/v4/v4.43.001.pdf

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan. - Copy MORE https://www.simscale.com/docs/tutorials/thermal-management-cht-analysis-electronics-box/

This project performs a heat transfer analysis of a sphere under convection. - Copy MORE
https://code-aster.org/V2/doc/default/fr/man_v/v4/v4.25.001.pdf

In this project a thermal analysis of a laser beam welding (LBW) was performed. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/circular_welding_analysis/

Aerodynamics of Aircraft winglet design for EuroAvia workshop 2 - Copy MORE https://www.simscale.com/projects/Ali_Arafat/euro-avia_workshop_2_-_final_1/

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil - Copy

Sample project for  fluid flow through a basket strainer by SimScale - Copy MORE https://www.simscale.com/projects/Ali_Arafat/bu_basket_stainer_-_simscale_project/

Mesh generation for internal fluid flow with Hex-Dominant parametric type. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/internal_fluid_flow_test_model/

streamwise webinar project for external aerodynamics of Ahmed Body and NACA wing section. The results from CFD were used for comparison with experimental data from ProCap software provided by streamwise. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/streamwise_webinar_project/

This project simulates Discrete Phase Model for a monodisperse gas-solid fluidised bed - Copy MORE https://www.simscale.com/projects/Ali_Arafat/dpm_analysis_of_a_gas-solid_fluidised_bed/

This project simulates a Centrifugal Pump with a rotating mesh using Arbitrary Mesh Interface - AMI - approach. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/centrifugal_pump_with_ami/

This project simulates incompressible flow through an industrial scale Butterfly Valve. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/flow_analysis_of_a_butterfly_valve/

This project simulates convective flow inside a Light Bulb. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/light_bulb_1/

Sample project for flow through a textile fabric done by SimScale - Copy MORE https://www.simscale.com/projects/Ali_Arafat/fabric_flow_-_pmf_project/

This project simulates incompressible non-newtonian flow through a sudden expansion. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/non-newtonain_flow_through_a_sudden_expansion/

Convective Heat Transfer application for room heating. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/hvac_webinar_-_session_3/

Radial - Centrifugal forward curved fan performance CFD analysis project - Copy MORE https://www.simscale.com/projects/Ali_Arafat/radial_fan_performance_analysis/

This project simulates water flow through a Gate valve by using the Incompressible flow simulation type. Main purpose of the project is to obtain the forces acting on the half-open valve and flow pattern through the pipe as it crosses the valve section. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/water_flow_through_a_gate_valve/

HPAC webinar project for Blade variation study of a Radial Fan is presented. Two design configurations for the Radial Fan is chosen, and both configurations are simulated in three different operating conditions. Main purpose of the project is to assess the pressure rise within each configuration and consequently compare flow coefficients. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/hpac-radial_fan_1/

This project simulates flow around a rotating keel of a sail yacht. - Copy MORE https://www.simscale.com/projects/Ali_Arafat/water_flow_around_a_moving_sail-yacht_keel/

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. The incompressible turbulent flow was assigned for the airflow. 2 cooling scenarios are going to be investigated MORE https://www.simscale.com/projects/mehmet_oezcan/ibm_analysis_-_public_-_thermal_analysis_of_a_laptop_cooling_system_-_copy/
1- Default internal cooling
2- External cooling by a fanned thermal pad - Copy

In this study, the flow coefficient (K_v value) of a globe valve was calculated. - Copy MORE https://www.simscale.com/projects/mehmet_oezcan/valve/

This project demonstrates full-fledged working of a car monoshock wishbone suspension system. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/car_mono_shock_wishbone_-_structural_analysis_1/

bars test - original model or alistardean - Copy MORE https://www.simscale.com/projects/ahmedhussain18/bars_test/

Forum help for pborgens - Copy MORE https://www.simscale.com/projects/ahmedhussain18/spring_-_custom_machines/

In this project, impact analysis of a wheelie bin was performed hitting the rigid floor at initial velocity of 4 m/s i.e. drop height of approx. 1 m. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/wheelie_bin_impact_analysis/

In this project a transient thermo-structural analysis of a spherical pressure vessel is demonstrated. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/design_analysis_of_a_spherical_pressure_vessel/

This project shows the bending of copper wire done through a rolling process. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/copper_wire_bending_analysis_1/

In this project the shrink fit analysis of tool holder is performed. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/tool_holder_shrink_fit_analysis/

This project demonstrates the hip joint prosthesis for the femur bone. Several types of materials are tested for the hip joint in this case including Co-Cr-Mo on Ti-6Al-4V, Co-Cr-Mo on UHMWPE and Concrete on Concrete. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/hip_joint_prosthesis_1/

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3 - Copy

This project demonstrates the stress analysis of femur bone subjected to different amounts of load. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/femur_bone_stress_analysis/

This project simulates a Centrifugal water pump with MRF approach - Copy MORE https://www.simscale.com/projects/Ali_Arafat/centrifugal_pump_with_mrf/

This project demonstrates the benefit of using modal dynamic analysis case over a simple linear dynamic analysis case. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/spring_mount_-_modal_dynamic_analysis/

This project shows the creep analysis of a superheater boiler pipe. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/superheater_boiler_pipe_creep_analysis/

This project demonstrate the drop test of a plastic bottle using first and second order mesh. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/plastic_bottle_drop_test_2/

In this project, a thermal shock analysis of a globe valve is performed. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/thermal_shock_analysis/

Vertical takeoff and Landing analysis of a Harrier - Copy

This project demonstrates the analysis of a mechanical arm using all available structural solvers on SimScale. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/static_and_dynamic_analysis_of_a_mechanical_arm/

This project shows the stress analysis of a pressure relief valve (PRV) under operation. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/pressure_relief_valve_-_stress_analysis_1/

This project shows the transient thermal analysis of a car braking system. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/braking_system_-_thermal_analysis_1/

In this project harmonic and static analyses of the Olympic Tower in Munich subjected to wind pressure were performed. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/olympia_tower_munich-_static_and_harmonic_analysis_1/

This project demonstrates the stress analysis of a large steel structure.

Original project of @pcachot. - Copy

This project performs an uncoupled thermomechanical analysis of a fixed beam under changing temperature. - Copy MORE https://www.simscale.com/projects/ahmedhussain18/fixed_beam_under_changing_temperature/

Public Profile

oliver47's profile