SimScale simulation projects by oguzhnakcy | Page 1

oguzhnakcy's profile

In this study, K-epsilon, K- omega, and K- omega SST modeling will be used with the help of OpenFOAM and turbulence. Reynolds number changes for each Reynolds number, the Y+ and turbulence models will be replaced. Finally, after determining the parameters, how the results change will be obtained by comparing them with each other.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

oguzhnakcy's profile