SimScale simulation projects by muzair | Page 1

muzair's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

this is a simulation to check if my gemoetry is fine

this is a copy of npt without refinements,refinements will be added

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

We create the enclosure and apply the boundary conditions for the analysis

CFD analysis is performed on Non-pneumatic tires

CFD analysis is performed on a non-pneumatic tire

Non-pneumatic tyre or airless tyre are not having support from air pressure rather they are
supported from polyurethane cellular spokes which acts as air part of pneumatic tyre. In
this tyre puncture and constant maintenance is completely eradicated.

Public Profile

muzair's profile