SimScale simulation projects by mshiva_sai_kri | Page 1

mshiva_sai_kri's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Test C
Design validation
Counter Flow - Copy

Template for the lecture held at the Karlsruhe Insitute of Technology for the workshop in mechanical design IV (Summer Semester 2019) - Copy

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mshiva_sai_kri's profile