SimScale simulation projects by mshahrokh | Page 1

mshahrokh's profile

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This project's goals included carrying out a 3D steady RANS simulation using the OpenFOAM solver on SimScale and validating the results with experimental data.

In this exercise, you will complete a laminar pipe flow analysis

a tutorial according to instructors explanations

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Incompressible Fluid Flow analysis of two globe valves

Public Profile

mshahrokh's profile