SimScale simulation projects by morski | Page 1

morski's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The effect of numerics on the simulation quality and convergence time.

Tutorial project for setting up a Multi-phase flow simulation

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

This project demonstrates the usage of rotating zones

CAD model is done by @quequen, explained in this thread: https://forum.simscale.com/t/collaborative-simulation-project-multiphase-flow-around-a-boat-hull/71/54

Public Profile

morski's profile