SimScale simulation projects by mohedoley | Page 1

mohedoley's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.




This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

-feasibility study of helical turbine
-CFD simulation of fluid flow

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for linear static analysis of a crane

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mohedoley's profile