SimScale simulation projects by mixxups | Page 1

mixxups's profile

The design goal is to provide a lighter design that does not compromise in terms of both stiffness and performance. Finite Element Analysis can be used to ensure that the upright design is adequate and will not fail during the racing competition.

A heat transfer analysis can be done to analyze the temperature and heat flux distribution of the cooling plate.

To use and identify the benefits of layer addition at walls for the purpose of wall modeling
The number of layers affects the velocity profile accuracy and that to appoint more layers will improve this profile
We should increase the size of the layer to have a majority of the Y+ value to be above 30 (and less than 200)

This project is the starting point for the homework for Session 1  of  the Baja SAE workshop. It enables the user to analyse the plastic deformation in an All Terrain  Vehicle (ATV)  Suspension .

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mixxups's profile