SimScale simulation projects by mgale | Page 1

mgale's profile

Run flow simulation through the part to know how plastic flows

Solving problem using simscale, ees, and approximate analytical solution

Demo simscale for transient cooling of extruded plastic

Third try with new geometry that hopefully works

The first initial design just to test out what happens

Version 5 of the die, with a 5 inch streamline and a 3 inch land, along with a 1.5 inch tapered hole.

Version 4 of the die, with a 2 inch streamline and a 3 inch land, along with a 1.5 inch tapered hole.

Version 3 of the die, with a 3 inch streamline and a 3 inch land, along with a 0.5 inch tapered hole.

Version 2 of the die, with a 3 inch streamline and 3 inch land and a 1.5 inch tapered hole.

Simulation project has three different variations technically 9

Part one and version one of this dye. 3 in and 3 in  with a 2.5 in tapered hole depth.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

mgale's profile