SimScale simulation projects by mehakkar123 | Page 1

mehakkar123's profile

In this project a nonlinear static structural analysis of a hand tool is demonstrated.

checking the flow through the heat exchanger

checking the temperature distribution on plate

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The effect of numerics on the simulation quality and convergence time.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Incompressible Fluid Flow analysis of two globe valves

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Public Profile

mehakkar123's profile