SimScale simulation projects by mcomandini | Page 1

mcomandini's profile

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight. - Copy

This project simulates the flow inside a car cabin. Convective Heat Transfer simulation type is used to obtain the flow behavior and thermal changes inside a car cabin. Mean age of fluid parameter is also observed to obtain the overal air quality inside the car cabin. - Copy

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

CFD of Water Flow around Keel of Sailing Yacht

This project is part of session 1 of the Air Conditioning and Ventilation webinar. It shows how the cooling of a Data center room can be simulated using SimScale. - Copy

The purpose of this project is to investigate and mitigate Vortex Shedding around a 50-story tall building at high wind speeds of 45 m/s. The building is 150 m tall and has a fixed square cross base of 20 x 20 m. Two designs are analysed, initially with sharp-corners and the optimized with Corner Softening using rounded-corners. To study the dynamic effects of wind loading, a Transient analysis with Incompressible Turbulent flow is performed. - Copy

Pressure Relief Valve Transient Analysis with 6DoF

Analysis of Water Flow around Keel of Sailing Yacht

Public Profile

mcomandini's profile