SimScale simulation projects by mayleaf | Page 1

mayleaf's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project a nonlinear static structural analysis of a hand tool is demonstrated.

The project illustrates how to simulate airflow around a complex F1 vehicle.

Tutorial project to set up the Hex-dominant Parametric mesh for rotating geometries. This mesh can then be used for MRF and AMI simulations that incorporate rotation effects.

This meshing tutorial shows how to setup the Tetrahedral automatic, Tetrahedral parametric and the Tetrahedral with local refinements for a structural analysis simulation.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This project shows how to simulate the airflow around a motorbike.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

Tutorial for meshing of valve geometry with Snappy Hex Mesh

Public Profile

mayleaf's profile