SimScale simulation projects by malwy102 | Page 1

malwy102's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project aims to showcase the process of setting up and running an incompressible analysis. As a geometry, we have a Francis turbine. A MRF Rotating Zone is used for the runner.

This tutorial teaches how to run a transient incompressible flow simulation using the Subsonic analysis type in SimScale using the AMI rotating zone on a Francis turbine.

Public Profile

malwy102's profile