SimScale simulation projects by malonso | Page 1

malonso's profile

CFD Professional Training Exercise 5- Fan external flow case

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

CFD Professional Training Homework Exercise 2- Hex-parametric meshing

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Design Build Fly - AIAA Workshop Session 1

In this exercise, you will complete a laminar pipe flow analysis

Tutorial: Incompressible turbulent airflow around a spoiler

Weight is one of the most critical parameters in aircraft design. In this exercise, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the yield stress and maximum allowable deflection

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Incompressible Fluid Flow analysis of two globe valves

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Project for Exercise 3 of FEA Professional training exam. To register for the training, please follow this link: https://www.simscale.com/professional-training/

Master class session 3: simulation of a multiphase flow

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The effect of numerics on the simulation quality and convergence time.

Handout  for Sports Aerodynamics Workshop: Session 3

Analysis of a drone with a 3-blade propeller of 12 degrees each

CFD Professional Training Exercise 4-Tank filling multi-phase

CFD Professional Training Exercise 3- Compressible Turbulent flow through a valve

Public Profile

malonso's profile