SimScale simulation projects by mallain | Page 1

mallain's profile

Dynamic FEA on mounting a snap-fit quadcopter arm to its frame

Static FEA to test the landing gear of a drone

Old project started producing errors that didn't align with the actual settings, so starting a new one.

Dynamic analysis of tapered cantilever beam snap joints with a curved cross-section.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This skateboard simulation project tests the durability of a skateboard when it lands on the ground with a rider on it. This project was presented for the Using SimScale with Autodesk Fusion 360 Webinar. A step-by-step by tutorial can be found here: https://www.simscale.com/forum/t/step-by-step-tutorial-impact-analysis-of-a-skateboard/37430

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

Dynamic FEA analysis to test concepts for 3D-printed drone legs.

Public Profile

mallain's profile