SimScale simulation projects by maks_majcen | Page 1

maks_majcen's profile

Try to simulate CFD study on a multistage cyclone separator design in Onshape, with SIMSCALE. - Copy

Inspired by this article https://insideevs.com/news/339220/tesla-model-3-battery-can-transfer-twice-the-heat-of-model-s-p100d/  this project goal is to evaluate the difference in cooling effectiveness between series and parallel cooling tube of an EV Battery Module.

The cooling strategies used to maintain the battery under 40C are cooling tubes places between the rows of cells. Inside the aluminium channel extrusions flows a coolant made of water and glycol. - Copy

CFD Analysis of Tesla Cybertruck. 
Cd (Coefficient of drag) 0.387 - Copy

A Tesla valve, called by Tesla a valvular conduit, is a fixed-geometry passive check valve. It allows a fluid to flow preferentially in one direction, without moving parts. The device is named after Nikola Tesla, who was awarded U.S. Patent 1,329,559 in 1920 for its invention. - Copy

Study of the ventilation system inside an office space - Copy

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm. - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

I'm trying different versions of the cyclone. Perhaps it will be easier to manufacture. Minimum parts. Everything can be printed out. - Copy

Volumetric Flowrate and Temperature analysis for a data center - Copy

Public Profile

maks_majcen's profile

Forum Activity