SimScale simulation projects by lpalad | Page 1

lpalad's profile

Determine if the beams will fail under load

Analyze if Swing Arm Press jig components will fail under press of 7.5 MPa and 80mm cylinder bore.

Attachment on doorknob for handsfree operation

Test if welds can be tested for strength. Weld features created using Onshape.

Simulating the stresses on the long hinge, which makes contact with the chain drive during chain adjustment

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lpalad's profile