SimScale simulation projects by louispion | Page 1

louispion's profile

try to set an fan in a external flow region.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

In this tutorial, the transport of exhaust gases into the atmosphere is simulated. Gases will come out of two chimneys of a plant.

An external flow study to see MAG 8K Heat Sink w/ D10 heat pipe.

Use fan P-Q to generate the flow and test this function by a ball blow by fan at first

Run parameter study to figure out how deep should heat pipe insert.

Use unit AL base and simplified HP to check temperature distribution and main heat flux range.

Criteria: 95 pct. heat flux could be the best depth.

1. Light on Integrating sphere, with  45 W DC power input (x0.8_36W heat), 3 second.
2. Evaluate if heat sink necessary or not

see how thickness affect heat spreading, lower highest temp is better under same BC (heat transfer coefficient)

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

louispion's profile