SimScale simulation projects by lmemeterio | Page 1

lmemeterio's profile

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.

Academic project: simulation of a exhaust pipe

Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s.
Doing this problem with two different fluids: water and aire.

Academic project: design of an exhaust pipe

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

lmemeterio's profile