SimScale simulation projects by lgoncalves | Page 1

lgoncalves's profile

Test material integrity under vacuum.
Rectangle 1inx1inx2in 2mm wall thickness.

Test material integrity under vacuum.
Rectangle 1inx1nx2in, 1mm wall thickness.

Test material integrity under vacuum.
Cylinder  1in OD, 1mm wall thickens.

Test material integrity under vacuum.
Cylinder  1in OD, 2mm wall thickens.

Conjugate Heat Transfer - Aluminum block insulator and air in the case

Conjugate Heat Transfer - Aluminum Block in the air case

Conjugate Heat Transfer Test - Vacuum case

Testing dissipation of the aluminum bock in vacuum

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

This tutorial shows how to analyze the Heat transfer in a heat sink.

This is a test to check the heat dissipation in an Aluminum block

Testing the heat dissipation of an aluminum block in a closed case

Public Profile

lgoncalves's profile