SimScale simulation projects by lewinste | Page 1

lewinste's profile

Heat transfer (natural and forced) in a LED light heat exchanger.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial for Static stress analysis of Underrun protection device

Modal analysis of a vessel, eigen-frequencies.

A strength analysis of a plate used for a rover chassis.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Thermal analysis, heat conduction, 4 slabs of different material.

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Incompressible Fluid Flow analysis of two globe valves

Earthquake, seismic response, steel beam, FEM

In this exercise, you will complete a laminar pipe flow analysis

structural analysis - tutorial 1 of simscale

Public Profile

lewinste's profile