SimScale simulation projects by leezeenone | Page 1

leezeenone's profile

Walking through the bearing block meshing tutorial, setting up Tetrahedral element parameters  with local refinements for a structural analysis simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project,  a static stress analysis of a guiding frame is performed. With manual definition of tetrahedral element size, the mesh quality is checked alright.  A special material with the property parameters of youngModulus 2.1e5 MPa, density 7850  kg/mm3, and poissonRatio  0.3  is used.  Equivalent stress as well as the model's  deformation are visualized. The wrapped deformation is scaled with a factor of 80 to differentiate  between the deformed state and the original geometry.

Public Profile

leezeenone's profile