SimScale simulation projects by laxman | Page 1

laxman's profile

Tutorial project for linear static analysis of a crane - Copy

Tutorial project for linear static analysis of a crane

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for a stress analysis of a connecting rod with a finished simulation.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used. - Copy

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used. - Copy

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

LED Spotlight project, aiming a bring the temperature of the diodes of a LED spotlight design below the maximum allowed temperature of 100C. A Conjugate Heat Transfer v2.0 analysis is used.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan. - Copy

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

Geometry for the enclosure snap fit tutorial.

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

Tutorial showing the workflow for nonlinear FEA structural analysis, including varying load, hyperelastic material and elastic support.

This project shows the bending of an Aluminium pipe through rolling process.

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

Computation of the thermal comfort including Local Mean Age of Air and radiation in a meeting room using CFD simulation.

Study of CO contamination inside a car park

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Conjugate heat transfer simulation tutorial.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

laxman's profile