Set up your own cloud-native simulation in minutes.Start Simulating Now
UCR MSE175A Practicum 3: Vacuum chamber stress analysis
0 145 0
Statistics
1 Geometry 1 Mesh 1 Simulation setup 1 Result
About this project
Each student was told to choose unique chamber dimensions and unique materials for the chamber part and lid part. They should then find the percentage of yield their chamber and lid parts experience based on max von Mises stress on each part from the linear static load analysis. The inner surfaces were not loaded, or loaded with a pressure of 0. The outer surfaces were loaded with 1 atmosphere pressure. Default mesh setting.
Related Projects
by malakelmohmalakelmoh
by bfedynichbfedynich
by SDnRD1SDnRD1
by mglasermglaser
by Get_BarriedGet_Barried
Project History
kmensink created this project