SimScale simulation projects by kklaas | Page 1

kklaas's profile

Control Plate 1.2 x 0.5 x 0.02 at 0.5 submerged. Checking effects of leading edge and trailing edge modifications

Submerged plate , simulating ventilation behind the plate

Tutorial project for setting up a Multi-phase flow simulation

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Based off of flow analysis around 720 boat

Simulation of Ventilation behind submerged plate

Rectangular plate is half submerged in water-air flow , investigation into ventilation of air behind the plate

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This  project analyzes the aerodynamics of a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kklaas's profile