SimScale simulation projects by kjpecenko11 | Page 1

kjpecenko11's profile

CEILING RIB WITH A LOTTA HOLES FOR X-MAS TREE RETAINERS

CEILING RIB WITH 0.05in THICKNESS AND OFFSET UNDER 5g LOAD

WINDSHIELD WIPER SERVO MOTOR COVER 0.05in SHEET METAL

stresses on the drive shaft caused by the contact between the worm and the wormgear

Tutorial for Static stress analysis of Underrun protection device

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for setting up the mesh using Hex-dominant automatic for external flow.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kjpecenko11's profile