SimScale simulation projects by kittynotacat | Page 1

kittynotacat's profile

This tutorial teaches how to run a transient incompressible flow simulation using the Subsonic analysis type in SimScale using the AMI rotating zone on a Francis turbine.

Thermal Analysis of a Differential Casing

The goal of this project is to simulate the simplified version of the cooling system of the HP Workstation Notebook.
This is a Conjugate Heat Transfer (CHT) problem. The incompressible turbulent flow was assigned for the airflow. 2 cooling scenarios are going to be investigated
1- Default internal cooling
2- External cooling by a fanned thermal pad - Copy

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kittynotacat's profile