SimScale simulation projects by keerts | Page 1

keerts's profile

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

This project demonstrates the usage of rotating zones

Homework for the Sport workshop : Session 2 
CFD analysis of a  bike tyre

The effect of numerics on the simulation quality and convergence time.

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Handout  for Sports Aerodynamics Workshop: Session 3

This project contains the geometry of the extruder for the first homework assignment of the 3D Printing workshop.

FSAE-Workshop-S3- Yaw angle- Analysis-Simulation

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755
2. Tutorial part 2: https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-2/79155

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

For step by step tutorial see: 
1. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-1/78878
2. https://www.simscale.com/forum/t/step-by-step-tutorial-session-2-full-car-aerodynamics-part-2/79350

This project contains everything you need to work on your homework assignement

Public Profile

keerts's profile