SimScale simulation projects by kbehera | Page 1

kbehera's profile

Cover is offset by 0.005 meter, 2 snaps, 
Assumptions : Symmetric on both planes.
Only a quarter portion of enclosure is analysed.

To find the Insertion & Removal force of a enclosure snap using non-linear structural simulation.

Insertion force of the Cantilever snap for PC FR material at 4percent safe strain limit. Structural non-linear simulation

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

kbehera's profile