SimScale simulation projects by katrick | Page 1

katrick's profile

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial for In-compressible Turbulent flow through a cyclone seperator

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project simulates water flow through a Gate valve.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Tutorial project for heat transfer in an engine piston

Tutorial project for Heat transfer in a heat-sink

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Step by step tutorial for the meshing, simulation and posprocessing of a structural analysis including plasticity. The case is the pressure burst of a gas tank. This is the project template to start from having just the geometry.

This project simulates the crossbar impact of David Beckham's fastest kick clocked at 97.9 mph - 157.6 kph.

Tutorial for Static stress analysis of Underrun protection device

Tutorial project for linear static analysis of a crane

Public Profile

katrick's profile