SimScale simulation projects by jvilar | Page 1

jvilar's profile

A sample project to show a possibility how to model pre-stress in a bolt.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Sample Geometry for Centrifugal pump user guide

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Stack effect (or chimney effect) describes the specific behavior of airflow that occurs due to a difference in indoor-to-outdoor temperature and air density. This phenomenon is best visualized through containers that facilitate this movement, such as chimneys or flue-gas stacks. Understanding stack effect is extremely important for building design, as it creates natural ventilation and air infiltration. As the name might suggest, chimney effect can also aid fireplace plumes and direct smoke propagation, therefore it is crucial to evaluate your design's ventilation systems in the early planning stage.

A single drone propeller is simulated with both 3 and 4 blades configuration. The main goal is to understand the aerodynamic effect of the number of blades, angles of attack and rotational speed. Incompressible steady state solver is used with k-omega turbulence model.

Analyse the duct positioning to have effective ventilation system

The main simulation goal is to identify the flow patterns and recirculation areas that may be problematic for smoke evacuation. Steady incompressible CFD simulation is carried with k-omega SST turbulence model in a garage model with 1 inlet and 3 outlets with a fixed flow rate plus extra atmospheric inlet/outlets.

Double girder gantry crane. Created for webinar on preparing geometry for simulation.

Public Profile

jvilar's profile