SimScale simulation projects by junior19a2000 | Page 1

junior19a2000's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project has the goal of verify the answers of my matlab's program

In this exercise, we will consider the deflection of a cantilever beam with a concentrated load at the free end. We can calculate the deflection by hand and via a static analysis using the SimScale platform.

El objetivo de este proyecto es mejor el diseño de una valvula, reduciendo las caidas de presion producidas por geometrias irregulares. La simulacion se realizara con el modelo de flujo turbulento.

El objetivo de este proyecto es comprobar los resultados analiticos de un ejercicio del capitulo 2 del libro Transferencia de Calor y Masa de Cengel.

Comprobar los resultados entre Simscale y ANSYS

Comparacion de los resultados obtenidos en ANSYS con los proporcionados por Simscale

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this exercise, you will use linear static analysis to analyze several configurations of an aircraft engine bracket under a vertical load.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

In this exercise, you will perform a simple heat transfer analysis on the SimScale Platform and then compare the results to a hand-calculated solution.

Public Profile

junior19a2000's profile