SimScale simulation projects by juliogallinaro | Page 1

juliogallinaro's profile

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

In this project thermal analysis of a Laser beam welding was demonstrated.

This project demonstrates the thermal effect of moving laser on a tooth.

Original project of @juliogallinaro


In this project, thermal stress analysis of polymeric photo-thermal microactuator was performed considering different bending angles and arm widths.

This project demonstrates the thermal effect of moving laser on a tooth.

Original project of @juliogallinaro

Public Profile

juliogallinaro's profile