SimScale simulation projects by jourada | Page 1

jourada's profile

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

Thermal analysis of cooling plate for electric motor

Porous Media Test3, new set of parameters.

I will attempt to simulate a tapered beam snap fit plastic part.

In this project vibration analysis of jet engine is performed.

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Homework assignment for the first session of the Applications of CFD in Formula Student and Formula SAE

following stadlerj's completed analysis to better understand dynamic analyses

This project contains resources for Session 1 of the F1 Workshop

NonLinear Analysis of suspension component.

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

Public Profile

jourada's profile