SimScale simulation projects by jona | Page 1

jona's profile

Tutorial project for Heat transfer in a heat-sink

Tutorial: Incompressible turbulent airflow around a spoiler

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This geometry serves as a starting point for the CHT tutorial of a PCB-board that is cooled by forced convection. See the comments section for the links to the corresponding forum topic.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

This project simulates incompressible flow through a Venturi Injector

Temperature on the surface of the heat sink

Assignment for Modelling and Simulation of Energy Systems

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Public Profile

jona's profile