SimScale simulation projects by jkenjar | Page 1

jkenjar's profile

Seminarska naloga pri predmetu RACUNALSNISKE SIMULACIJE V EPOS-U.

Seminarska naloga pri predmetu RAC SIM v EPOS.

This project shows an electronic cooling application of ICs on PCB using the conjugate heat transfer transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature within solids and fluids due to thermal interaction.

Simulacija kotlovskega razdelilca s kretnico. Razdelilec je imel po moji presoji tovarnisko napako, saj je primesaval dvizni in povratni vod.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project shows an example on how certain phenomena involved in heat exchangers can be simulated with SimScale.

This project shows the mixing and moving of granular particles through a screw conveyor.

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions.

A Test of the CHT Capability on a heat exchanger

In this project, the classical academic flow simulation of a lid-driven cavity is carried out. It shows
- how to run a quasi-2D flow simulation on SimScale
- how to upload an OpenFOAM mesh

Public Profile

jkenjar's profile