SimScale simulation projects by jjaeho7 | Page 1

jjaeho7's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Sample project for how to set-up the Hex-Dominant Parametric mesh for flow around a vehicle body.

Tutorial project for setting up a Multi-phase flow simulation

Tutorial project with the goal of simulating the wave effects on a boat.

Tutorial project for Aerodynamic simulation of compressible flow over Airfoil

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics.

Tutorial for In-compressible Turbulent flow through a cyclone seperator

This  project analyzes the aerodynamics of a spoiler

Tutorial for Static stress analysis of Underrun protection device

Tutorial project for linear static analysis of a crane

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jjaeho7's profile