SimScale simulation projects by jeggundran | Page 1

jeggundran's profile

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Drone propeller flow analysis simulation using MRF model and SimScale standard mesher.

This advanced thermal management tutorial describes the setup and analysis of electronics cooling on an electronics box containing different electronic components being cooled by the airflow of a fan.

This tutorial project aims to showcase how to set up and run a simulation for a pump geometry. The Standard meshing tool was used.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

Conjugate heat transfer simulation tutorial.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

jeggundran's profile