SimScale simulation projects by jcar | Page 1

jcar's profile

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The tutorial project is a sample Electronic cooling sink which consists of 3 solid regions and 1 fluid region. The solid regions are two FB-4 chips, which have a higher initial temperature and a heat sink over one of the chips. The air flows over the solid regions to remove the heat from it.

prueba_tutorial_copia3
Los resultados se están dñanado despues de varias simulaciones

Comfort simulation without ducts to reduce mesh size

Public Profile

jcar's profile