SimScale simulation projects by jcagnola | Page 1

jcagnola's profile

nvfdiaohbioFnkgfns - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

The project illustrates how to simulate airflow around a complex F1 vehicle. Incompressible flow simulation type is chosen to simulate the flow pattern around the vehicle. Main outputs of the simulation are pressure distribution around the lifting surfaces of the vehicle, aerodynamic flow coefficients and velocity streamlines. - Copy - Copy - Copy

CFD of a CPAP cooling adaption for a 3D printed Q5 effector - Copy

Thermal Analysis of a Differential Casing

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

The project illustrates how to simulate airflow around a complex F1 vehicle. Incompressible flow simulation type is chosen to simulate the flow pattern around the vehicle. Main outputs of the simulation are pressure distribution around the lifting surfaces of the vehicle, aerodynamic flow coefficients and velocity streamlines. - Copy - Copy

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm. - Copy - Copy - Copy

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm. - Copy - Copy

M2.5R Ramjet engine test (Entire engine) - Copy - Copy

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes. - Copy

Automotive Aerodynamics - Perrinn Le Mans Prototype 1 Car CFD Analysis - Copy

Tutorial: Incompressible turbulent airflow around a spoiler - Copy

Aerodynamic analysis of a Formula race car without actually designed wheels - Copy

Designing Heat Profile U-Type Heat Exchanger - Copy - Copy - Copy - Copy

The project illustrates how to simulate airflow around a complex F1 vehicle. Incompressible flow simulation type is chosen to simulate the flow pattern around the vehicle. Main outputs of the simulation are pressure distribution around the lifting surfaces of the vehicle, aerodynamic flow coefficients and velocity streamlines. - Copy

Testing LMP1 Car- Porsche 919 Evo in Aero/Fluid Dynamics way - Copy

FINALLY THE PROJECT I WAS SEARCHING FOR - Copy

nah nothing just a radom test - Copy - Copy

In this tutorial, a aerodynamic analysis of a F1 frontwing is presented. The flow around the wing is modeled as an incompressible, turbulent flow using a k-epsilon turbulence model. This tutorial is based on the first part of the SimScale F1 Simulation workshop series about aerodynamics. - Copy

In this project a structural and an eigenfrequency analysis of a front wing is demonstrated. - Copy

Aerodynamic Analysis of an F1 Front Wing - Copy

This a PERRINN project - for more details go to www.
perrinn.com - Copy

Look at the front wing of an F1 race car. - Copy

The project illustrates how to simulate airflow around a complex F1 vehicle. - Copy

Public Profile

jcagnola's profile